£195.00
The ISC Rigging Rope Wrench (Bearing) 120 kg is a robust rigging lowering device designed to provide controlled descent of suspended loads on rope. Featuring a one‑way locking bearing wheel and optimised for 12–13 mm rope, it delivers smooth, controllable lowering up to 120 kg (264 lbs) while remaining free‑spinning during lifting operations. Perfect for tree rigging, arborist jobs and rope‑handling systems where controlled load descent is essential.
1 in stock
ISC Rigging Rope Wrench (Bearing) 120kg – IS-RP292AA
The RP292 One-Way Locking Bearing Rigging Rope Wrench is a highly efficient friction device designed to improve control during rigging and lowering operations in arboriculture. It is suitable for loads ranging from 20 to 120 kg. As a result, it offers precise handling when working with medium to heavy sections.
The one-way locking wheel provides additional friction during lowering. Therefore, it allows better control of heavy loads and smoother, safer descents. During lifting, the wheel runs freely. Because of this, it enables effortless hauling without added resistance.
You can anchor the Rigging Rope Wrench at the top of the tree. As a result, both the ground worker and climber can control the system. This flexibility proves especially useful in smaller crews. For example, the climber can take control of the rope while the ground worker manages the load below.
The system also allows smooth transitions between lowering and lifting. When you need to raise a section or guide it over an obstacle, the wrench disengages. Therefore, it removes friction and allows a controlled and efficient lift.
The RP292 is optimised for use with 13 mm rope. In addition, it pairs well with lightweight rigging setups such as hollow-braid slings. This makes it a versatile and portable solution for modern tree rigging.
You can also install the device at the base of the tree. Because of this, you can incorporate additional pulleys to increase mechanical advantage when lifting heavier loads.
For lighter applications, the RP290 bushed version supports loads up to 70 kg. However, the RP292 provides greater control and performance for more demanding rigging tasks.
Important Safety Information:
Rigging and dismantling operations involve significant risk. You must receive proper training before using this equipment. Always ensure all components in your system meet appropriate working load limits. In addition, never exceed the lowest-rated component. Regular inspection and correct use are essential for safe operation.
Overall, the RP292 Rigging Rope Wrench delivers enhanced control, flexibility, and efficiency. In conclusion, it is a valuable tool for professional arborists managing complex rigging and lowering tasks.
Orders placed by 2pm will be processed & dispatched the same working day (subject to stock availability).
You will receive an email letting you know when your order has been dispatched. Once your order has been dispatched, the delivery will be attempted twice on consecutive days. If the carriers need to try a third attempt, you may be liable for a re-delivery charge.
We use a courier service to deliver larger items, which normally requires a signature. If you are likely to be out when our delivery is due, you may enter delivery instructions (e.g. ‘Please leave order in porch’) in the order notes as you check out. However, if you do ask for goods to be left on your property while you are out, the courier will be unable to get a signature, so this is at your own risk.
UK Mainland orders have the following delivery charges based on the total value of your order:
Please note we are unable to deliver to PO Boxes.
Orders can be returned within 30 days of receipt if you are not happy with the goods.
Earn rewards points on every purchase you make on our website, then redeem them for discounts on future orders.
